Occupational Certificate: Waste Electrical and Electronic Equipment (WEEE) Collector and Sorter
Collect, assess, sort, containerise, store and prepare e-waste for transport safely and legally.
- BeginnerLevel
- 154.8 hOf learning
- 39Lessons
- NQF 2 · 30 crLevel and credits
- EnglishLanguage
- CertificateOn completion
Last updated November 2026
Funded seats (SETA and sponsor) may be available. Ask about funding
You will be asked to log in or create a free account first.
This course includes
- 154.8 total hours
- 39 lectures
- 5 quizzes
- QCTO-registered curriculum, NQF Level 2
- Delivered by industry specialists and practitioners
- AiX certificate of completion; QCTO certificate on passing the external assessment
- Full lifetime access
- Access on phone, tablet and laptop
What you'll learn
- Explain what WEEE is, its categories and sources, and why it must be recycled
- Describe the toxic substances in WEEE and the health and environmental risks they pose
- Plan a collection route and a daily and weekly work schedule
- Collect WEEE using non-motorised means with the correct PPE and approved procedures
- Handle hazardous WEEE and manage an accident or incident according to procedure
- Record, assess and sort WEEE according to the needs of downstream processes
- Label, containerise and store WEEE in a legally compliant way, including batteries
- Prepare WEEE for transport and understand prohibited activities and legal requirements
How the programme is structured
Knowledge modules cover the theory, practical skills modules are done hands-on with our practitioners, and the work experience modules are completed in a real workplace. Together they prepare you for the external integrated summative assessment (EISA).
Skills you'll gain
- WEEE identification
- Hazard identification
- PPE use
- Route planning
- Sorting and classification
- Labelling and containerising
- Safe storage
- Transport preparation
- Record keeping
Part of these pathways
Course content: the journey
3 sections · 39 lectures · 154.8 total hours · ≈ 11 MB to download
Knowledge module · 524901-001-00-KM-01 · NQF 2 · 7 crModule 1: WEEE collection, assessment, sorting, containerising, storage and preparation for transport
This knowledge module builds your understanding of WEEE and of collecting, making a basic assessment of, sorting, classifying, containerising, storing and transporting it. It is the module a learner acquires to achieve the part qualification. It carries about 70 notional hours.
- KM-01-KT01 Introduction to WEEE Preview 7 h · < 1 MB
- KM-01-KT01 Quiz: Introduction to WEEE Locked until you enrol 20 min · < 1 MB
- KM-01-KT01 Formative assessment: Introduction to Waste Electrical and Electronic Equipment (WEEE) Locked until you enrol 3 h · < 1 MB
- KM-01-KT02 Overview of WEEE Locked until you enrol 5 h 40 min · < 1 MB
- KM-01-KT02 Quiz: Overview of WEEE Locked until you enrol 18 min · < 1 MB
- KM-01-KT02 Formative assessment: Overview of WEEE Locked until you enrol 2 h · < 1 MB
- KM-01-KT03 Collection of WEEE using non-motorised means Locked until you enrol 6 h 40 min · < 1 MB
- KM-01-KT03 Quiz: Collection of WEEE Locked until you enrol 20 min · < 1 MB
- KM-01-KT03 Formative assessment: Collection of WEEE (using non-motorised means) Locked until you enrol 3 h · < 1 MB
- KM-01-KT04 Assessment and sorting of WEEE Locked until you enrol 6 h · < 1 MB
- KM-01-KT04 Quiz: Assessment and sorting of WEEE Locked until you enrol 18 min · < 1 MB
- KM-01-KT04 Formative assessment: Assessment and sorting of WEEE Locked until you enrol 2 h · < 1 MB
- KM-01-KT05 Containerising and storage of WEEE Locked until you enrol 6 h · < 1 MB
- KM-01-KT05 Quiz: Containerising and storage of WEEE Locked until you enrol 12 min · < 1 MB
- KM-01-KT05 Formative assessment: Containerising and storage of WEEE Locked until you enrol 2 h · < 1 MB
- KM-01-KT06 Transportation of WEEE Locked until you enrol 5 h · < 1 MB
- KM-01-KT06 Formative assessment: Transportation of WEEE Locked until you enrol 1 h 30 min · < 1 MB
Practical skills module · 524901-001-00-PM-01 · NQF 2 · 10 crPractical 1: Collect, assess, sort, containerise, store and prepare WEEE for transport
This practical module gives you hands-on experience of collecting, assessing, sorting, containerising, storing and preparing WEEE for transport. It carries about 100 notional hours.
- PM-01-PS01 Collect WEEE using non-motorised means Locked until you enrol 10 h · < 1 MB
- Lab 1: Identify WEEE and sort it into categories Locked until you enrol 2 h · < 1 MB
- Lab 2: Find the value: material fractions and the magnet test Locked until you enrol 2 h · < 1 MB
- Lab 3: Spot the hazard: toxic components and items that cannot be collected Locked until you enrol 2 h · < 1 MB
- Lab 4: Choose, inspect, put on and take off PPE Locked until you enrol 2 h · < 1 MB
- Lab 5: Move appliances safely with non-motorised equipment, cold appliances kept upright Locked until you enrol 2 h 30 min · < 1 MB
- Lab 6: Plan a collection route and a weekly work schedule Locked until you enrol 2 h · < 1 MB
- Lab 13: Emergency drills: battery fire, broken lamp, refrigerant leak, injury Locked until you enrol 3 h · < 1 MB
- PM-01-PS02 Assess and sort WEEE Locked until you enrol 7 h 30 min · < 1 MB
- Lab 7: Weigh and record WEEE in an intake register Locked until you enrol 2 h · < 1 MB
- Lab 8: Basic assessment for downstream processes: reuse, repair, recycle or hazardous Locked until you enrol 2 h · < 1 MB
- Lab 9: Sort a mixed load and control the sorting risks Locked until you enrol 2 h 30 min · < 1 MB
- PM-01-PS03 Containerise and store WEEE Locked until you enrol 7 h 30 min · < 1 MB
- Lab 10: Isolate and containerise batteries Locked until you enrol 2 h · < 1 MB
- Lab 11: Containerise and label WEEE Locked until you enrol 2 h · < 1 MB
- Lab 12: Set up and audit a WEEE storage area against the National Norms and Standards for the Storage of Waste Locked until you enrol 2 h 30 min · < 1 MB
- PM-01-PS04 Prepare to transport WEEE Locked until you enrol 7 h 30 min · < 1 MB
- Lab 14: Prepare a load for the transporter: method, logistics, securing and paperwork Locked until you enrol 2 h 30 min · < 1 MB
Work experience module · 524901-001-00-WM-01 · NQF 2 · 13 crWorkplace 1: Processes to collect, assess, sort, containerise, store and prepare WEEE for transport
This work experience module gives you structured experience under guidance of a qualified or experienced person. The supervisor must give you exposure to as many types of WEEE as possible, and the activities may be simulated because the informal WEEE sector is not fully structured. It carries about 130 notional hours.
- Simulated depot: practise the full work experience in the training lab Locked until you enrol 10 h · < 1 MB
- WM-01-WE01 Observe and assist Locked until you enrol 10 h · < 1 MB
- WM-01-WE02 Work under supervision Locked until you enrol 10 h · < 1 MB
- WM-01-WE03 Work independently with quality checks Locked until you enrol 10 h · < 1 MB
Where this can take you
- WEEE collector
- WEEE sorter
- E-waste depot worker
- Buy-back centre assistant
How you are assessed
Learning is assessed through formative questions in the learner guide, practical tasks in the practical workbook, and a mentor-signed workplace logbook, with evidence filed in a portfolio of evidence (POE). Workplace activities may be simulated in the lab where the workplace cannot offer them. The external integrated summative assessment (EISA) arrangements are confirmed with you on enrolment.
Description
This occupational certificate is for people who want to work at the first step of South Africa's e-waste chain: collecting used electrical and electronic equipment from households, businesses and drop-off points, and getting it sorted and stored for recyclers. South Africa produces about 360,000 tonnes of e-waste a year and only a small share is formally recycled, so trained collectors and sorters are what keep hazardous items out of landfill and valuable materials in circulation.
The qualification is registered at NQF level 2 and carries 30 credits. It has three components: one knowledge module (7 credits), one practical skills module (10 credits) and one work experience module (13 credits). You learn about WEEE types, hazards such as mercury, lead and lithium batteries, relevant legislation, collection without motorised vehicles, sorting, containerising, storage and transport requirements.
Practical work covers planning routes, collecting with the correct PPE, recording and assessing WEEE for downstream processes, labelling and containerising, and preparing loads for the transporter. The workplace logbook is signed off by a mentor and moves from observing and assisting, to working under supervision, to working independently with quality checks. AlgoAtWork's lab manual provides a simulated workplace where activities cannot be done in a real depot.
Algorhythmlab (Pty) Ltd t/a AlgoAtWork presents this learning material. The curriculum code is 524901-001-00-01 and the SAQA ID is 121336.
Instructor: the practitioners
AiX industry specialists & practitioners
Industry specialists and practitioners
- 17 courses
- 0 learners
Our programmes are delivered by people who do this work for a living: engineers, developers, technicians, designers and operators from South African industry. They teach from current practice, supervise the practical work and help learners prepare their portfolios of evidence and the external assessment. Algorhythmlab (Pty) Ltd is a QCTO-accredited skills development provider (07-QCTO/SDP240624104750).
Learner reviews: voices
No reviews yet. Be the first to share how this course went for you.
Frequently asked questions
What is the NQF level and how many credits is it?
The qualification is registered at NQF level 2 and carries 30 credits: 7 for knowledge, 10 for practical skills and 13 for work experience.
How long does it take?
The module guides state about 70 notional hours for knowledge, 100 for practical skills and 130 for work experience, which is about 300 notional hours in total.
Do I need to find my own workplace?
The work experience needs a supervisor or mentor. The curriculum allows the activities to be simulated because the informal WEEE sector is not fully structured, and AlgoAtWork's lab manual sets out a simulated depot for this.
How is the work experience recorded?
You keep a workplace logbook that your mentor signs off. It has three stages: observing and assisting, working under supervision, and working independently subject to quality checks.
What do I need to be able to read and write?
Please check the entry requirements with the AiX team before you enrol; we will confirm them for your intake.
Who issues the certificate?
AlgoAtWork is a QCTO accredited skills development provider. Learners are certified through the QCTO, not by the provider.